Beko kqe 1050 사용자 설명서

EN

18

 
Sliding body shelves with rear hangers 
can be moved back and forth. Height 
of these shelves can be adjusted by 
removing and then installing them 
to upper or lower positions. Raise 
the shelf up slightly and pull towards 
yourself to remove it.

 
You can store food such as butter, 
cheese, and margarine in this section 
which has a lid.

 Sliding body shelves can be pulled 
by slightly lifting up from the front and 
moved back and forth. They come to 
a stop point when pulled towards front 
to allow you reach the foods placed at 
the back of the shelf; when it is pulled 
after slightly lifted upwards at the 
second stop point, the body shelf will 
be released.
The shelf should be hold tightly from 
the bottom as well in order to prevent 
it from tipping over. The body shelf is 
placed on the rails at the sides of the 
refrigerator body by bringing it to one 
lower or one upper level.
The body shelf should be pushed 
backwards to seat it completely.