Uniden MHS125 사용자 설명서

E-18

Uniden MHS125 Radio Owner’s Manual

While listening to a channel, adjust the SQUELCH knob until

the noise is filtered and you can hear only the transmission.

If you switch to a channel with a lot of noise or a weak trans-

mission, you may need to readjust the squelch level again.

note: setting the squelch level too high may prevent you
from hearing weaker transmissions. if you are having
difficulty hearing a transmission, try setting the squelch
level lower.

Changing the Channel

Press the Channel Up and Channel Down buttons briefly to

scroll through the channels one channel at a time. Press and

hold the Channel Up or Channel Down button to quickly

scroll through the channels.

Making a transmission

Select the channel you want to transmit on, then press and

hold the Push to Talk button. Release the Push to Talk

button when you’re finished talking to let the other party

respond.

To prevent stuck microphone problems or situations where

the Push to Talk button is pushed accidentally, the radio

limits your talk time to 5 minutes in a single transmission.

For the best sound quality, hold the microphone about two

inches away from your mouth.

See the channel lists starting on page E-23 for a list of

receive-only channels.

Boosting the transmission power

In most situations, the 1 Watt transmission power is all you

need. If you find yourself far away from other stations and

have trouble getting a response, you may need to boost the

transmission power from 1 Watt to 2.5 Watts or 5 Watts:

Select the channel you want to transmit on.



