Uniden MHS125 사용자 설명서

다운로드
페이지 40
E-19
Uniden MHS125 Radio Owner’s Manual
Press the 1/2.5/5W button to switch to the next transmission 
power level (for example, from 5 Watt to 2.5 Watts; from 2.5 
Watts to 1 Watt, or from 1 Watt back around to 5 Watts).
The display shows the new transmission power in the lower 
left hand corner. The transmit power remains at the new 
setting until you change it again.
note: Don’t forget to change the transmission setting back 
to 1 Watt when you move close to other stations.
Some channels (for example, channels 13 and 67) limit 
the transmission power to 1 Watt. When you tune to a 
limited-power channel, the radio automatically switches to 
list of power-restricted channels.
In an emergency, if you press and hold the Push to Talk 
switch while briefly pressing the1/2.5/5W button, the 
power level changes from 1W to 5W for a Li-Ion battery or 
from 1W to 2.5W for alkaline batteries.
Setting the UIC Channel Mode
The radio comes preset to use the channels assigned for 
the US. If your current area uses Canadian or international 
channel assignments, press the UIC-Lock key to rotate  
through the US, Canadian, and international channels.
using the strobe sos light
You can use this radio in an emergency. If you turn on the 
strobe SOS high-intensity LED light on your radio, your radio 
will blink “S O S” in international Morse Code. This will make 
it easier for rescuers to find you faster.
Your radio operates normally when the sos leD strobe is 
activated.
2.
3.