Polycom SIP 2.2.0 사용자 설명서

Administrator’s Guide SoundPoint IP / SoundStation IP 

4 - 14

Network Time Protocol (SNTP) timeserver. The time and date displayed on 

the phone will flash continuously until a successful SNTP response is received 

to indicate that they are not accurate. The time and date display can use one of 

several different formats and can be turned off.
Configuration changes can performed centrally at the boot server or locally:

All phones except the SoundPoint IP 301 can display a customized animation 

on the idle display in addition to the time and date. For example, a company 

logo could be displayed (refer to 

 on page 

Configuration file: 
sip.cfg

Turn time and date display on or off.

For more information, refer to 

 on page 

Set the time and date display formats.

For more information, refer to 

 on 

page 

Set the basic SNTP settings and daylight savings parameters.

For more information, refer to 

 on 

page 

Web Server

(if enabled)

Set the basic SNTP and daylight savings settings. 

Navigate to:  http://<phoneIPAddress>/coreConf.htm#ti

Changes are saved to local flash and backed up to <Ethernet 
address>-phone.cfg on the boot server. Changes will permanently 
override global settings unless deleted through the Reset Local 
Config menu selection and the <Ethernet address>-phone.cfg is 
removed from the boot server.

Local Phone User 
Interface

The basic SNTP settings can be made in the Network Configuration 
menu.  

For more information, refer to 

 on 

page 

.

The user can edit the time and date format and enable or disable the 
time and date display under the Settings menu.

Changes are saved to local flash and backed up to <Ethernet 
address>-phone.cfg on the boot server. They will permanently 
override global settings unless deleted through the Reset Local 
Config menu selection.