Chariot Carriers CX 2 사용자 설명서

Guide the quick-release axle through the wheel axle and screw 
on the nut. Both skewer springs must be located on each side 
so that the narrow side points towards the centre of the hub.

Tip the carrier backwards and put it down on the handlebar. 
Insert the wheel in the axle dropouts.

Close the quick-
release lever.

In order to ensure that the hub is clamped suffi ciently in the 
axle dropouts, the quick-release lever must begin gripping as it 
moves from the open to the middle position, and approaching 
the closed position you should clearly feel resistance as you 
tighten.
If it is too easy or too diffi cult to move the quick-release, tighten 
or loosen the lock nut on the other side of the hub to adjust.

DANGER

Always make sure that the quick-release is correctly instal-
led. An incorrectly tensioned quick-release may lead to the 
rear wheel coming loose, resulting in accidents.

DANGER

When using the carrier as a Jogging Stroller, always put the 
safety wrist strap, which is fastened securely on the left rear 
upper frame tube, around your wrist. This prevents the carrier 
from accidentally rolling away.