Maytag W10188238A 사용자 설명서

6. Attach damper assembly to the rear exhaust vent opening by 

sliding it down into the guides on both sides of the opening, 
and pushing it into the lower locking tabs.

NOTE: Make sure the assembly is oriented correctly, with the 
hinge at the top, and the blade opening away from the microwave 
oven.

7. Secure damper plate through damper assembly frame with 

the damper plate screw removed in Step 1.

8. Open the damper blade, and reinsert the blower motor screw 

removed in Step 2.

1. Repeat Step 1 from “Wall Venting Installation Only.”
2. Repeat Step 2 from “Wall Venting Installation Only.”
3. Rotate blower motor so that exhaust ports face the top of 

microwave oven, and flat sides of blower motor face back of 
microwave oven. Lower blower motor back into microwave 
oven.

IMPORTANT: If blower motor is not positioned with flat sides 
facing the back of the microwave oven (as shown), performance 
will be poor.

4. Close damper plate and secure it with screw removed in 

Step 1 of “Wall Venting Installation Only.”

5. Reinsert blower motor screw removed in Step 2 of “Wall 

Venting Installation Only.”

6. Attach damper assembly to damper plate by sliding it into the 

guides on both sides of the damper plate’s exhaust vent 
opening, and pushing it onto the locking tabs.

NOTE: Make sure the assembly is oriented correctly, with the 
hinge at the back, and the blade opening upward.

7. Open the damper blade, and secure the blower motor to the 

microwave oven with the top blower motor screw removed in 
Step 1 of “Wall Venting Installation Only.”

A

B

C

D

E

F

A

C

B

A

A

B

C

D

E