Epson CX5700F 매뉴얼 소개

Solving Problems

■

Make sure your original is positioned in the top left corner of the glass. 
Place it 2.5 mm (0.1 inch) from the edges to avoid cropping.

■

Make sure your paper is loaded short edge first and is positioned against 
the right edge guide with the left edge guide against its left side. Do not 
load paper above the arrow mark inside the left edge guide.

■

If you have problems sending a fax, make sure the phone cable is 
connected correctly and verify that the phone line works by connecting a 
phone to it. Also make sure that your recipient’s fax machine is turned on 
and working.

■

If you have problems receiving a fax, make sure paper is loaded, the phone 
cable is connected correctly, and the phone line works. To automatically 
receive faxes, make sure you see a 

Y

 on the first screen display. (See 

page 44 for details.) If you see 

Receiving

 on the display but nothing prints, 

the fax data may be too large. Tell the sender to resend the fax in smaller 
sections.

■

If you connected the EPSON STYLUS CX5700F to a DSL phone line, you 
must install a DSL filter to the line or you will not be able to fax. Contact 
your DSL provider for the necessary filter.

Service required. See your 
documentation for details.

An EPSON STYLUS CX5700F part needs to be 
replaced. Contact your local authorized servicer or 
contact Epson for a referral. See page 61 for details.

Printer error -> or
Scanner error ->
See your documentation and call 
service if necessary.

There is a problem with the EPSON STYLUS 
CX5700F. Turn it off and then back on. If the error 
does not clear, contact your local authorized servicer 
or contact Epson for a referral. See page 61 for 
details.