Epson CX5700F 매뉴얼 소개

Solving Problems

■

If your phone line has static or other noise problems, turn off the 

ECM

 

(Error Correction Mode) setting and try faxing again. See page 36 for 
details.

■

If paper does not feed, remove it from the sheet feeder. Flip through the 
stack to separate the sheets a little. Then reload the paper against the right 
edge guide, and slide the left edge guide against the paper (but not too 
tightly). Make sure the paper is not in front of the feeder guard.

■

Do not load too many sheets at once (up to 20 sheets of photo paper or 
100 sheets of plain paper). See the User’s Guide for more information.

■

If paper is jammed, you see a paper jam message on the display. Follow 
these steps to clear the jam:

1. Press the 

OK

 button to eject the jammed paper. If the jammed paper is 

not ejected, go to the next step.

2. If the paper is stuck near the sheet feeder or output tray, gently pull it 

out.

If the paper is stuck inside the EPSON STYLUS CX5700F, press the 
P

On

 button to turn it off. Open the scanner and remove any paper 

inside, including any torn pieces. Do not pull it backward however; 
this can damage the sheet feeder. Close the scanner, then turn the 
EPSON STYLUS CX5700F back on.

If you have any problems with the copy or print quality, try these solutions:

■

Make sure the document is placed flat against the document table glass and 
the EPSON STYLUS CX5700F is not tilted or placed on an uneven 
surface.

■

Load the paper printable side up (usually the whiter, brighter, or glossy 
side).

■

Make sure your paper is not damp or curled.

■

Use a support sheet with special paper or load your paper one sheet at a 
time. Remove sheets from the output tray as they are printed.