Alcatel-Lucent 6850-48 참조 가이드
BFD Commands
page 39-8
OmniSwitch CLI Reference Guide
September 2009
ip bfd-std echo interval
Configures the global BFD echo packet time interval. The echo function is available with the asynchro-
nous or demand mode. Echo packets are transmitted to BFD peers to see if they loop back to the peer from
which they originated.
nous or demand mode. Echo packets are transmitted to BFD peers to see if they loop back to the peer from
which they originated.
ip bfd-std echo interval echo-interval
Syntax Definitions
echo-interval
The echo time interval, in milliseconds. The valid range is 100–999.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• The echo packet time interval is also configurable at the BFD interface level. Note that configuring the
global value with the ip bfd-std echo interval command does not override the value set for the inter-
face using the ip bfd-std interface echo interval command.
face using the ip bfd-std interface echo interval command.
• The global echo packet time interval serves as the default interval value for a BFD interface. The
default interval value is overridden when a specific value is configured for the interface.
Examples
-> ip bfd-std echo interval 500
Release History
Release 6.3.4; command was introduced.
Related Commands
MIB Objects
alaBfdGlobalEchoRxInterval
parameter
default
echo-interval
100 milliseconds
Configures the echo packet time interval for a BFD interface.
Displays the BFD global status and general configuration parameters.