Fujitsu S510M 사용자 가이드
8 |
Use only the supplied AC cable and AC adapter
(power cable).
(power cable).
2. Insert the connectors of the AC adapter to the scanner
inlet, and then plug the cord in a power outlet.
2.2.2. Connecting the USB cable
Follow the procedures below to connect the USB cable.
ATTENTION
●
Use the USB cable supplied with this scanner.
The operation with a commercially available
USB cable is not guaranteed.
The operation with a commercially available
USB cable is not guaranteed.
●
When connecting to a USB hub, be sure to
connect the scanner to the hub nearest to your
computer (first stage). If you connect it to a USB
hub from the second stage onwards, ScanSnap
may not operate correctly.
connect the scanner to the hub nearest to your
computer (first stage). If you connect it to a USB
hub from the second stage onwards, ScanSnap
may not operate correctly.
●
If you connect the scanner with USB 2.0, it is
required that the USB port and the Hub are
compliant with USB 2.0. The scanning speed
may slow down when you connect the scanner
with USB 1.1. If your computer has the USB 2.0
compatible port, use it.
required that the USB port and the Hub are
compliant with USB 2.0. The scanning speed
may slow down when you connect the scanner
with USB 1.1. If your computer has the USB 2.0
compatible port, use it.
1. Remove the seal from the USB connector.
2. Connect the scanner and your computer with the USB
cable.
3. Open the Paper chute of the scanner.
ATTENTION
If the scanner does not turn on automatically,
press the [POWER] button on the scanner.
press the [POWER] button on the scanner.
Ö Your computer will automatically detect the scanner.
The installation of ScanSnap is complete!
ATTENTION
The ScanSnap Manager icon
with a triangle
below the icon appears in the Dock menu.
When the icon remains inactive
, press the
[POWER] button to turn off the scanner, and then
press the [POWER] button again to restart the
scanner. (Allow at least 5 seconds when you turn
on/off the scanner.)
press the [POWER] button again to restart the
scanner. (Allow at least 5 seconds when you turn
on/off the scanner.)
HINT
When using the [POWER] button to turn off/on the
scanner, press it for longer than one second.
* To prevent miss-operation, the [POWER] button
scanner, press it for longer than one second.
* To prevent miss-operation, the [POWER] button
does not work unless it is pressed for longer than
one second.
one second.
USB cable
Outlet
Inlet