Fujitsu S510M 사용자 가이드

ScanSnap S510M for Mac Getting Started | 11

4. Press the [SCAN] button.

The front and back

images are merged into
a double-page spread
image.

HINT

The loading method and ScanSnap Manager’s
settings differ according to the documents to be
scanned. Refer to “ScanSnap S510M for Mac
Operator’s Guide” on the “ScanSnap Setup
CD-ROM” for details.

3.4.2. Scanning irregular-shaped Documents

This section explains how to scan documents that are
difficult to scan as it is.

1. Click and hold the ScanSnap Manager icon

on the

Dock menu, and select [Settings...] from the menu.

Ö The "Scan and Save settings" appears.

2. On the [Paper size] tab, click the

Carrier Sheet

Settings…

button.

Ö The "Carrier Sheet Settings" dialog box appears.

3. On the "Carrier Sheet Settings" window, select "Create

front and back images separately" in the "Mode"
drop-down list, and then click the [OK] button.

4. Open the Carrier Sheet and place the document inside.

Neatly align the top of the
material with the top of the
Carrier Sheet. Center the
material so that it is
entirely contained in the
Carrier Sheet.

5. Load the Carrier Sheet onto the ScanSnap.

• Load the Carrier Sheet

with the portion striped
in black and white as the
leading edge as shown
in the right figure.

• When the Carrier Sheet

is used for scanning,
continuous scanning is
not possible. Scan one
piece or one sheet at
one time.

6. Press the [SCAN] button.

ÖScanning starts.

ÖThe image is centered and output in the specified size.

HINT