Fujitsu S510M 사용자 가이드
ScanSnap S510M for Mac Getting Started | 15
Symptom
Check This Item
Resolution
The scanned image is chipped /Slant
lines are produced on the scanned
image/The output image is wider than
the original.
With "Automatic detection" being selected
in the "Paper size" drop-down list, was the
document skewed during a scan?
Neatly align the edges of paper sheets with
Side Guide.
*If you are scanning documents of mixed
paper sizes, marking the "Scan mixed paper
size" checkbox, carefully load smaller
documents so that they can be fed straight.
If those documents cannot be fed straight, it
is recommended to scan only documents of
about the same size at a time.
Side Guide.
*If you are scanning documents of mixed
paper sizes, marking the "Scan mixed paper
size" checkbox, carefully load smaller
documents so that they can be fed straight.
If those documents cannot be fed straight, it
is recommended to scan only documents of
about the same size at a time.
Files created by using the ScanSnap
cannot be opened with a specified
application.
cannot be opened with a specified
application.
(For example, an error occurs when
you try to open a PDF file with Adobe
Acrobat.)
Is a folder specified as the Image saving
folder on another personal computer or a
hard disk on the network?
For those who answered "Yes" to the above
question: did an error occur while files
scanned with the ScanSnap were being
saved (because, for example, a LAN cable
came off)?
folder on another personal computer or a
hard disk on the network?
For those who answered "Yes" to the above
question: did an error occur while files
scanned with the ScanSnap were being
saved (because, for example, a LAN cable
came off)?
If such network-related errors occur, files
may not be saved properly, and corrupted
files may exist in the folder.
Verify the location of the Image saving
folder, and then delete corrupted files, if
any. After that, retry scanning.
folder, and then delete corrupted files, if
any. After that, retry scanning.
*1) In order to confirm the scanner is connected to which type, USB1.1 or USB2.0, see [USB type] in the [Scanner and driver information]
window. To open this window, click and hold down the mouse button on the ScanSnap Manager icon, select [Help] - [About ScanSnap
Manager], and then click the [Detail] button on the [Version Information] window.
Manager], and then click the [Detail] button on the [Version Information] window.
* Further information will be available at the FAQ corner of our website. Visit our website at:
4.2. Clearing Paper Jams
1. Pull the Cover open lever and open the ADF.
2. Remove the jammed document.
3. Close the ADF.
2. Remove the jammed document.
3. Close the ADF.
Ö
Gently push the ADF until you hear it click when returning it to its original position.
Cover open lever
ADF
Click!