Fujitsu S510M 사용자 가이드

ScanSnap S510M for Mac Getting Started | 19

ATTENTION

Make sure that the Pad ASSY is firmly
secured. If it is not secured, documents will
jam or other feeding errors may occur.

5. Close the ADF

Gently push the ADF until you hear it click when
returning it to its original position.

6. Turn on the scanner.

The ScanSnap Manager icon changes from the

inactive state

to the active state

7. Click and hold down the mouse button on the

ScanSnap Manager icon

in the Dock menu, and

select [Check consumable supplies] from the menu.

8. In the “Check consumable status” window, click the

[Reset] button of the consumable you replaced.

Ö A confirmation pop-up screen appears.

Ö If you click the [Yes] button, the counter is reset to

“0.”

6.3. Replacing the Pick Roller

Replace the Pick roller following the procedures below.

1. Remove the document on the Paper chute if any.

2. Pull the Cover open lever and open the ADF.

3. Adjust the Side Guide to the “A5” size.

4. Pinch the handle on the Sheet guide to remove it.

5. Rotate the Pick roller bushing (Left) in the direction of

the arrow.

ADF

Paper chute

Cover open lever

Pick roller shaft

Pick roller bushing

Pick roller

Handle

Sheet guide

Claw

ADF