Printronix l7032 참조 매뉴얼
Logo, TIFF
121
Example
To download a PCX logo:
^IPCX,Cfilename[,size]^G
PCX logo data
^IPCX,END^G
Your host may interpret the PCX data as control codes, which
affects the way the host sends data to the printer. Consult your
host's user manual for sending binary data.
affects the way the host sends data to the printer. Consult your
host's user manual for sending binary data.
To print a PCX logo in Extended Graphics mode:
^IPCX,Efilename^G
Logo, TIFF
Purpose
Downloads and prints TIFF format logos.
Mode
Standard Graphics format except for option E (see below).
Format
Format 1
(cc) ITIFF,
option name [,size] [,DISK] (cc)G
TIFF logo data
(cc) ITIFF, END(cc)G
(cc) ITIFF, END(cc)G
Format 2
(cc) ITIFF,
option name [,DISK] (cc)G
Format 3
(cc) ITIFF,
option (cc)G
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
(SFCC). Enter the specific SFCC for your VGL
configuration.
ITIFF,
The Logo Generation command. Enter ITIFF, (the
comma following the command is required).
comma following the command is required).
option
C = Creates/Loads logo into printer memory.
The logo can be printed later.
E = Executes/Prints logo.
D = Deletes logo from printer memory.
R = Resets/Clears logo from printer memory.
L = Lists all the TIFF logos that are stored in
D = Deletes logo from printer memory.
R = Resets/Clears logo from printer memory.
L = Lists all the TIFF logos that are stored in
printer memory.
name
Name of logo. Required for options C, E, and D.
size
Size (in bytes) of the logo.
DISK
Optional parameter to download a logo to flash
memory or execute (print) a logo stored in flash
memory. Enter DISK. Currently, the DISK
parameter only applies to option C and option E.
memory or execute (print) a logo stored in flash
memory. Enter DISK. Currently, the DISK
parameter only applies to option C and option E.
(cc)G
The required terminator for the ITIFF, command.
Enter the SFCC for your VGL configuration
followed by a G to end the ITIFF, command
sequence.
Enter the SFCC for your VGL configuration
followed by a G to end the ITIFF, command
sequence.
TIFF logo data
Logo data in TIFF format. Must be in either
uncompressed or packbits format.
uncompressed or packbits format.