Printronix l7032 참조 매뉴얼
Logo Generation (Version II)
119
Comments
The Pixel Expansion (IPEXP) command, described on page 125,
may be used with all logos printed using the ILOGO, command.
may be used with all logos printed using the ILOGO, command.
Logos and symbols created using the Z command (described on
page 150) are still available and do not conflict with the ILOGO,
command. Do not use any alphanumeric-rotation commands with
ILOGO, symbols and logos.
page 150) are still available and do not conflict with the ILOGO,
command. Do not use any alphanumeric-rotation commands with
ILOGO, symbols and logos.
Example
The following program and print sample illustrate how the
copyright symbol (value 41 from Table 14) is called using the
ILOGO, command. Note that the alphanumerics command ^M is
simply “introducing” an Extended Graphics command; therefore,
the alphanumeric command parameters (01,01,000) are optional.
copyright symbol (value 41 from Table 14) is called using the
ILOGO, command. Note that the alphanumerics command ^M is
simply “introducing” an Extended Graphics command; therefore,
the alphanumeric command parameters (01,01,000) are optional.
^PY^-
^M^IPEXP,06,06^G^ILOGO,41^G^-
^PN^-
Table 14. Logo Generation Values
Value
Description
41
Copyright symbol
42
Copyright symbol at 90 degrees
43
Registered trademark symbol
44
Registered trademark symbol at 90 degrees
45
UL symbol, large
46
UL symbol, large, at 90 degrees
47
Trademark symbol
48
Trademark symbol at 90 degrees
49
CSA symbol
4A
CSA symbol at 90 degrees
4B
UL symbol, medium
4C
UL symbol, small
61
TUV Rheinland symbol
62
GS-Mark symbol
ilogo.e