Netgear GSM712 사용자 설명서

6-14

Command Line Interface

When the interface command is properly entered, you will be taken to the Interface Configuration 
Mode, where the prompt changes from

 

FSM726(config)#

 

to

 

FSM726(config-if)#.

 

When you are done configuring one particular interface and wish to configure another interface, 
you must exit the Interface Configuration Mode by using the

 

exit

 

command. You then have to 

re-enter Interface Configuration Mode by specifying another interface, again, using the 

interface

 

command

 

When you’re in interface configuration mode, you will be able to configure the following items. 

Class of Service (CoS) is a way of managing traffic in a network by treating different types of 
traffic with different levels of service priority. Higher priority traffic gets faster treatment during 
times of switch congestion.

Syntax

Where

<normal/high>

 = the priority given to the port. When set to high, traffic from and destined for 

this port will take priority over traffic from other ports. 

This command allows you to assign a name or description to a port. 

syntax

where

<description>

 = the description you wish to give to this particular interface  

Syntax

Where