Netgear GSM7212 사용자 설명서
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
8-60
Switching Commands
December 2004, 202-10010-02
Physical Mode
Selects the desired port speed and duplex mode. If auto-negotia-
tion support is selected, then the duplex mode and speed will be
set from the auto-negotiation process. Note that the port's maxi-
mum capability (full duplex -100M) will be advertised. Other-
wise, this object will determine the port's duplex mode and
transmission rate. The factory default is Auto.
tion support is selected, then the duplex mode and speed will be
set from the auto-negotiation process. Note that the port's maxi-
mum capability (full duplex -100M) will be advertised. Other-
wise, this object will determine the port's duplex mode and
transmission rate. The factory default is Auto.
Physical Status
Indicates the port speed and duplex mode.
Link Status
Indicates whether the Link is up or down.
Link Trap
This object determines whether or not to send a trap when link
status changes. The factory default is enabled.
status changes. The factory default is enabled.
LACP Mode
Displays whether LACP is enabled or disabled on this port.
show port protocol
This command displays the Protocol-Based VLAN information for either the entire system, or for
the indicated Group.
the indicated Group.
Format
show port protocol {<groupid> | all}
Mode
Privileged EXEC
Group Name
This field displays the group name of an entry in the Protocol-
based VLAN table.
based VLAN table.
Group ID
This field displays the group identifier of the protocol group.
Protocol(s)
This field indicates the type of protocol(s) for this group.
VLAN
This field indicates the VLAN associated with this Protocol
Group.
Group.
Interface(s)
This field lists the slot/port interface(s) that are associated with
this Protocol Group.
this Protocol Group.
show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format
show port-channel {<logical slot/port> | all}
Mode
Privileged EXEC
Logical slot/port
The logical slot and the logical port.