Netgear GSM7212 사용자 설명서
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands
8-61
December 2004, 202-10010-02
Name
The name of this port-channel (LAG). You may enter any string
of up to 15 alphanumeric characters.
of up to 15 alphanumeric characters.
Link State
Indicates whether the Link is up or down.
Admin Mode
May be enabled or disabled. The factory default is enabled.
Link Trap Mode
This object determines whether or not to send a trap when link
status changes. The factory default is enabled.
status changes. The factory default is enabled.
STP Mode
The Spanning Tree Protocol Administrative Mode associated
with the port or port-channel (LAG). The possible values are:
with the port or port-channel (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.
Mbr Ports
A listing of the ports that are members of this port-channel
(LAG), in slot/port notation. There can be a maximum of eight
ports assigned to a given port-channel (LAG).
(LAG), in slot/port notation. There can be a maximum of eight
ports assigned to a given port-channel (LAG).
Port Speed
Speed of the port-channel port.
Type
This field displays the status designating whether a particular
port-channel (LAG) is statically or dynamically maintained. The
possible values of this field are Static, indicating that the port-
channel is statically maintained; and Dynamic, indicating that the
port-channel is dynamically maintained.
port-channel (LAG) is statically or dynamically maintained. The
possible values of this field are Static, indicating that the port-
channel is statically maintained; and Dynamic, indicating that the
port-channel is dynamically maintained.
Active Ports
This field lists the ports that are actively participating in the port-
channel (LAG).
channel (LAG).
show storm-control
This command displays switch configuration information.
Format
show storm-control
Mode
Privileged EXEC
Broadcast Storm Recovery Mode May be enabled or disabled. The factory default is
disabled.
802.3x Flow Control Mode May be enabled or disabled. The factory default is disabled.
show vlan
This command displays detailed information, including interface information, for a specific
VLAN.
VLAN.