Netgear GSM7224 사용자 설명서

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

Switching Commands

8-65

202-10009-01_060204

Mode

Interface Config

snmp trap link-status all

This command enables link status traps for all interfaces.

Note:

This command is valid only when the Link Up/Down Flag is enabled (see “snmp-server

enable traps linkmode”).

Format

snmp trap link-status all

Mode

Global Config

no snmp trap link-status all

This command disables link status traps for all interfaces.

Note:

This command is valid only when the Link Up/Down Flag is enabled (see “snmp-server

enable traps linkmode”).

Format

no snmp trap link-status all

Mode

Global Config

spanning-tree

This command sets the STP mode for a specific port-channel (LAG). This is the value specified
for STP Mode on the Port Configuration Menu. 802.1D mode is the default. The interface is a
logical slot and port for a configured port-channel. The

all option sets

all configured port-

channels (LAGs) with the same option.

Format

spanning-tree {<logical slot/port> | all} {off |

802.1d | fast}

Mode

Global Config

The mode is one of the following:

802.1d

IEEE 802.1D-compliant STP mode is used

fast

Fast STP mode is used

off

STP is turned off