Netgear GSM7224 사용자 설명서
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands
8-89
202-10009-01_060204
disconnect
This command closes a telnet session.
Format
disconnect {<sessionID> | all}
Mode
Privileged EXEC
show loginsession
This command displays current telnet and serial port connections to the switch.
Format
show loginsession
Mode
Privileged EXEC
ID
Login Session ID
User Name The name the user will use to login using the serial port or Telnet. A new user
may be added to the switch by entering a name in a blank entry. The user name may be up to 8
characters, and is not case sensitive. Two users are included as the factory default, admin and
guest.
characters, and is not case sensitive. Two users are included as the factory default, admin and
guest.
Connection From
IP address of the telnet client machine or EIA-232 for the serial
port connection.
port connection.
Idle Time
Time this session has been idle.
Session Time
Total time this session has been connected.
show users
This command displays the configured user names and their settings. This command is only
available for users with readwrite privileges.
available for users with readwrite privileges.
The SNMPv3 fields will only be displayed if SNMP is available
on the system.
Format
show users
Mode
Privileged EXEC
User Name
The name the user will use to login using the serial port, Telnet or
Web. A new user may be added to the switch by entering a name
in a blank entry. The user name may be up to eight characters, and
is not case sensitive. Two users are included as the factory
default, admin and guest
Web. A new user may be added to the switch by entering a name
in a blank entry. The user name may be up to eight characters, and
is not case sensitive. Two users are included as the factory
default, admin and guest