Netgear GSM7224 사용자 설명서

8-90

Switching Commands

Shows whether the operator is able to change parameters on the 
switch (Read/Write) or is only able to view them (Read Only). As 
a factory default, admin has Read/Write access and guest has 
Read Only access. There can only be one Read/Write user and up 
to five Read Only users. 

SNMPv3 AccessMode   This field displays the SNMPv3 Access Mode. If the value is set 

to 

the SNMPv3 user will be able to set and retrieve 

parameters on the system. If the value is set to 

the 

SNMPv3 user will only be able to retrieve parameter information. 
The SNMPv3 access mode may be different than the CLI and 
Web access mode.

SNMPv3 Authentication  This field displays the authentication protocol to be used for the 

specified login user.

This field displays the encryption protocol to be used for the 
specified login user.

This command adds a new user (account) if space permits. The account <username> can be up to 
eight characters in length. The name may be comprised of alphanumeric characters as well as the 
dash (‘-’) and underscore (‘_’). The <username> is not case-sensitive.

Six user names can be defined.

>

This command removes an operator.

no users name <username>

The admin user account cannot be deleted.