Netgear GSM7224 사용자 설명서
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
8-30
Switching Commands
202-10009-01_060204
no snmp-server enable traps
This command disables the Authentication Flag.
Format
no snmp-server enable traps
Mode
Global Config
snmp-server enable traps bcaststorm
This command enables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
only if the broadcast storm recovery mode setting associated with the port is enabled.
Default
Enabled
Format
snmp-server enable traps bcaststorm
Mode
Global Config
no snmp-server enable traps bcaststorm
This command disables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
only if the broadcast storm recovery mode setting associated with the port is enabled.
Format
no snmp-server enable traps bcaststorm
Mode
Global Config
snmp-server enable traps linkmode
This command enables Link Up/Down traps for the entire switch. When enabled, link traps are
sent only if the Link Trap flag setting associated with the port is enabled (see ‘snmp trap link-
status’ command).
sent only if the Link Trap flag setting associated with the port is enabled (see ‘snmp trap link-
status’ command).
Default
Enabled
Format
snmp-server enable traps linkmode
Mode
Global Config
no snmp-server enable traps linkmode
This command disables Link Up/Down traps for the entire switch.
Format
no snmp-server enable traps linkmode
Mode
Global Config