Netgear GSM7224 사용자 설명서

8-32

Switching Commands

This command deletes trap receivers for a community. 

This command assigns an IP address to a specified community name. The maximum length of 
name is 16 case-sensitive alphanumeric characters.

IP addresses in the SNMP trap receiver table must be unique. If you make multiple entries 

using the same IP address, the first entry is retained and processed. All duplicate entries are 
ignored. 

snmptrap ipaddr <name> <ipaddrold> <ipaddrnew>

This command activates or deactivates an SNMP trap. Enabled trap receivers are active (able to 
receive traps). Disabled trap receivers are inactive (not able to receive traps).

This command deactivates an SNMP trap. Disabled trap receivers are inactive (not able to receive 
traps).