Netgear FS116E 설치 설명서

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste 

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, 

this product should be treated and recycled in accordance with the laws of your jurisdiction 

implementing the WEEE Directive.

© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks 

of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or 

registered trademarks of their respective holders. Information is subject to change without notice. 

Standards compatibility IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX 

Fast Ethernet, IEEE 802.3x Flow Control, IEEE 802.1p and TOS 
priority, WRR queuing with two queues

Network interface

RJ-45 connector for 10BASE-T or 100BASE-TX

Power Adapter

12V @ 1.0A DC input

Power Consumption

5.46W max

Weight

0.81 Kg (1.79 lbs)

Dimensions 
(W x D x H)

287 mm x 103 mm x 27 mm
11.3 in x 4.1 in x 1.1 in

Operating temperature 0 to 40° C (32 to 98° F)
Operating humidity

10% t0 90% relative humidity, non-condensing

Electromagnetic 
compliance

CE Class A, included EN55022 (CISPR 22) and EN55024,
FCC part 15 Class A, VCCI Class A, C-Tick Class A

Power adapter safety 
agency approvals

CE mark, Commercial UL listed (UL 60950-1), C-Tick, CB

Frame filter rate

14,880 frames/sec max for 10M port; 148,800 frames/sec max 
for 100M; 

Frame forward rate

14,880 frames/sec max for 10M port; 148,800 frames/sec max 
for 100M;

Network latency
(using 64-byte packets)

100 Mbps to 100 Mbps: 10 μs max

Address database size up to 8K MAC addresses
MAC Address Learning Automatically updated
Queue buffer

1.25 Mb

NETGEAR Green 
features

• Auto power-down mode saves energy when ports are unused
• Power-saving per port if the cable length is less than 32.8 feet 

(10 meters)

Power light is not lit

The switch has no power. Make sure that:
• The power cord is properly connected to the switch.
• The power adapter is properly connected to a functioning power 

outlet. If it is in a power strip, make sure the power strip is turned 
on. If the socket is controlled by a light switch, make sure the 
switch is in the on position.

• You are using the NETGEAR power adapter supplied with your 

switch.

Port number light is 
not lit for a connected 
device, or stays on 
continuously

There is a hardware connection problem.
• Make sure the cable connectors are securely plugged in at the 

switch and the device.

• Make sure the connected device is turned on.
• If the Ethernet cable is connected to a NIC or other Ethernet 

adapter, make sure the card or adapter is installed correctly and 
is working.

• Make sure the cable is less than 328 feet (100 meters).

Thank you for selecting NETGEAR products. 

After installing your device, locate the serial number on the label of your product and use 
it to register your product at http://www.NETGEAR.com/register. Registration is required 
before you can use our telephone support service. Registration via our website is strongly 
recommended.
Go to http://kbserver.netgear.com for product updates and Web support. For Warranty and 

Regional Customer Support information, see the Resource CD that came with your 

product.

FS116E_IG_12Aug09.fm  Page 2  Wednesday, August 12, 2009  10:13 AM