Netgear gsm7312 사용자 설명서

7-76

Switching Commands

This command sets the name for the file that is uploaded from the switch. The switch “remembers” 
the last file name used. 

Append the file path to the file name if the string is less than 31 characters. Otherwise, use the 
“transfer upload path”  command, and the File Name will be appended to the File Path.

This command is valid only when the Transfer Mode is TFTP. See “transfer upload mode” . 

Blank

This command sets the type of file to upload from the switch. 

The datatype is one of the following:

Configuration file.

Error log.

Message log.

Trap log (the default).

This command starts an upload transfer after displaying current settings and upon confirmation.

This command specifies whether XMODEM or TFTP mode is used when uploading from the 
switch. 

. This is valid only when the transfer is initiated by the serial EIA 232 

port.