Netgear gsm7312 사용자 설명서

Routing Commands

8-11

This command sets a 4-digit dotted-decimal number uniquely identifying the router. To ensure 
uniqueness, it defaults to the value of the switch's management IP address. If this value is not 
configured, then the value of any active router interface IP address is used. 

This command displays information relevant to the RIP router.

A 32 bit dotted decimal number representing the interface.

RIP administrative mode of router RIP operation; enable activates and disable 

de-activates the RIP ability for the switch. This is a configured value.

The number of route changes made by RIP to the IP Route Database.

The number of responses sent to RIP queries from other systems.

This command displays information related to a particular RIP interface.

The unit slot.port identifying each interface. This is a configured value.

The IP source address used by the specified RIP interface. This is a configured 

value.

The RIP version(s) used when sending updates on the specified interface. The 

types are none, RIP-1, RIP-1c, RIP-2. This is a configured value.

The RIP version(s) allowed when receiving updates from the specified interface. 

The types are none, RIP-1, RIP-2, Both. This is a configured value.

RIP administrative mode of router RIP operation; enable activates, disable de-

activates it. This is a configured value.

Indicates whether the RIP interface is up or down. This is a configured value.

The RIP Authentication Type for the specified interface. The types are none and 

simple. This is a configured value.

The RIP Authentication Key for the specified interface. The actual key will be 

**** to avoid compromising privacy. This is a configured value.