Netgear gsm7312 사용자 설명서
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands
8-9
202-10009-01
Format
config ip interface netdirbcast <slot.port> <enable/
disable>
config ip interface create
This command configures an IP address on an interface.
The value for <ipaddr> is the IP Address of the interface.
The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask
of the interface. This changes the label "IP address" in "Show IP Interface."
of the interface. This changes the label "IP address" in "Show IP Interface."
Format
config ip interface create <slot.port> <ipaddr>
<subnetmask>
config ip interface delete
This command deletes an IP address from an interface.
The value for <ipaddr> is the IP Address of the interface.
The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask
of the interface.
of the interface.
Format
config ip interface delete <slot.port> <ipaddr>
<subnetmask>
show ip summary
This command displays all the summary information of the IP. This command takes no options.
Format
show ip summary
Default Time to Live
The computed TTL (Time to Live) of forwarding a packet from
the local router to the final destination.
Router ID
A 32 bit integer in dotted decimal format identifying the router, about which
information is displayed. This is a configured value.
Routing Mode
Shows whether the routing mode is enabled or disabled.
IP Forwarding Mode
Shows whether forwarding of IP frames is enabled or disabled. This is a
configured value.