Netgear gsm7312 사용자 설명서

8-28

Routing Commands

This command configures the external LSDB limit for OSPF.     If the value is -1, then there is no 
limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches 
the external LSDB limit, the router enters overflow state. The router never holds more than the 
external LSDB limit non-default AS-external-LSAs in it database. The external LSDB limit 
MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF 
area. The range for <limit> is -1 to 2147483647. 

-1

config router ospf extlsdblimit <-1-2147483647> 

This command enables or disables Router Discovery on an interface. The possible values for 
<mode> are enable and disable. 

enable

This command configures the maximum time, in seconds, allowed between sending router 
advertisements from the interface. The range for maxinterval is 4 to 1800 seconds. 

600

This command configures the minimum time, in seconds, allowed between sending router 
advertisements from the interface. The range for mininterval is 3 to the value of maxinterval. 

0.75 * maxinterval