Netgear gsm7312 사용자 설명서
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-30
Routing Commands
202-10009-01
VRRP Commands
show router vrrp info
This command displays whether VRRP functionality is enabled or disabled on the 7000 Series L3
Managed Switch. It also displays some global parameters which are required for monitoring This
command takes no options.
Managed Switch. It also displays some global parameters which are required for monitoring This
command takes no options.
Format
show router vrrp info
VRRP Admin Mode
Displays the admin mode for VRRP functionality on the switch.
Router Checksum Errors
Represents the total number of VRRP packets received with an invalid VRRP
checksum value.
Router Version Errors
Represents the total number of VRRP packets received with Unknown or
unsupported version number.
Router VRID Errors
Represents the total number of VRRP packets received with invalid VRID for
this virtual router.
config router vrrp adminmode
This command sets the administrative mode of VRRP in the router.
Default
disable
Format
config router vrrp adminmode <enable|disable>
show router vrrp interface detailed
This command displays all configuration information and VRRP router statistics of a virtual router
configured on a specific interface.
configured on a specific interface.
Format
show router vrrp interface detailed <slot.port> <vrID>
IP Address
This field represents the configured IP Address for the Virtual router.
VMAC address
Represents the VMAC address of the specified router.
Authentication type
Represents the authentication type for the specific virtual router.
Priority
Represents the priority value for the specific virtual router.
Advertisement interval
Represents the advertisement interval for the specific virtual router.
Pre-Empt Mode
The preemption mode configured on the specified virtual router.
Administrative Mode
Represents the status (Enable or Disable) of the specific router.
State
Represents the state (Master/backup) of the specific virtual