Netgear gsm7312 사용자 설명서

다운로드
페이지 268
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software 
8-32
Routing Commands
202-10009-01
Invalid Authentication Type   Represents the total number of VRRP packets received with unknown 
authentication type. 
Authentication Type
 
Mismatch   
Represents the total number of VRRP advertisements received for which 'auth 
type' not equal to locally configured one for this virtual router.
Packet Length Errors  
Represents the total number of VRRP packets received with packet length less 
than length of VRRP header
config router vrrp interface adminmode
This command enables and disables the virtual router configured on the specified interface. 
Enabling or disabling the status field starts or stops a virtual router. The parameter <vrID> is the 
virtual router ID which has an integer value ranging from 1 to 255. The adminmode can be set to a 
value of enable or disable.
Default  
Disable
Format  
config router vrrp interface adminmode <slot.port> 
<vrID> <enable/disable>
config router vrrp interface routerID
This command sets the virtual router ID on an interface for Virtual router configuration in the 
router. The parameter <vrID> is the virtual router ID which has an integer value range from 1 to 
255.
Default  
There is no default value for vrID.
Format  
config router vrrp interface routerID <slot.port> 
<vrID>
config router vrrp interface priority
This command sets the priority value for the virtual router configured on a specified interface. The 
priority of the interface is a priority integer from 1 to 254. The parameter <vrID> is the virtual 
router ID which has an integer value ranges from 1 to 255.
Default  
100
Format  
config router vrrp interface priority <slot.port> 
<vrID> <1-254>