Netgear fr314 참조 가이드
Reference Guide for the Model FR314, FR318 and FV318 Cable/DSL Firewall and VPN Routers
DHCP Server Configuration
9-3
•
WINS Setup
•
Dynamic Ranges
•
Static Entries
•
Current DHCP Leases
All options are described in the sections that follow.
General Setup
The General Setup options are:
•
Enable DHCP Server
By default, the firewall router’s DHCP server is enabled. To disable the DHCP server, clear
this check box.
By default, the firewall router’s DHCP server is enabled. To disable the DHCP server, clear
this check box.
•
Client Default Gateway
In most cases, the firewall router is the only or primary router on a local network. Therefore,
the firewall router assigns its own LAN IP Address as Gateway to the attached PCs on its local
network by default. To specify another address, type it in the Client Default Gateway box.
In most cases, the firewall router is the only or primary router on a local network. Therefore,
the firewall router assigns its own LAN IP Address as Gateway to the attached PCs on its local
network by default. To specify another address, type it in the Client Default Gateway box.
DNS Setup
The DNS Setup options are:
•
Domain Name
Specifies the registered domain name for your network or Internet service provider. An
example of a domain name is "your-domain.com". If you do not have a domain name, leave
this box blank.
Specifies the registered domain name for your network or Internet service provider. An
example of a domain name is "your-domain.com". If you do not have a domain name, leave
this box blank.
•
Set DNS Servers using NETGEAR Firewall’s Network settings
Specifies that the DNS servers that you specified in the Network Settings window are used.
Specifies that the DNS servers that you specified in the Network Settings window are used.
•
Specify manually
Specifies that different DNS servers than the ones specified in the Network Settings window
are used. If you select this check box, enter the new DNS Server addresses in the DNS
Server 1, DNS Server 2, and DNS Server 3 boxes.
Specifies that different DNS servers than the ones specified in the Network Settings window
are used. If you select this check box, enter the new DNS Server addresses in the DNS
Server 1, DNS Server 2, and DNS Server 3 boxes.
DNS servers are used by computers on your LAN to resolve domain names to IP addresses.
You only need to enter one DNS Server address, but multiple DNS entries will improve
performance and reliability.
You only need to enter one DNS Server address, but multiple DNS entries will improve
performance and reliability.