Netgear fr314 참조 가이드
Reference Guide for the Model FR314, FR318 and FV318 Cable/DSL Firewall and VPN Routers
9-4
DHCP Server Configuration
WINS
WINS, or Windows Internet Naming Service, is a server process for resolving Windows-based
computer names to IP addresses. If a remote network contains a WINS server, your Windows PCs
can gather information from that WINS server about its local hosts. This allows your PCs to
browse that remote network using Network Neighborhood.
computer names to IP addresses. If a remote network contains a WINS server, your Windows PCs
can gather information from that WINS server about its local hosts. This allows your PCs to
browse that remote network using Network Neighborhood.
If you will be connecting to a remote network that operates a WINS server, enter the WINS Server
address(es) in the WINS Server 1 and WINS Server 2 boxes. Otherwise, leave these boxes blank.
address(es) in the WINS Server 1 and WINS Server 2 boxes. Otherwise, leave these boxes blank.
Dynamic Ranges
The Dynamic Range is the range of IP addresses dynamically assigned by the DHCP server. The
Dynamic range should be in the same subnet as the firewall router’s LAN IP address.
Dynamic range should be in the same subnet as the firewall router’s LAN IP address.
By default, the firewall router assigns addresses from 192.168.0.2 through 192.168.0.9. To specify
another range for assigning addresses, type the beginning IP address in the Range Start box, type
the ending IP address in the Range End box, and then click Update. When the firewall router is
updated, a message confirming the update is displayed at the bottom of the window.
another range for assigning addresses, type the beginning IP address in the Range Start box, type
the ending IP address in the Range End box, and then click Update. When the firewall router is
updated, a message confirming the update is displayed at the bottom of the window.
Note:
The DHCP server may assign a total of 254 dynamic and static IP addresses. However, only
eight addresses are allowed to access the Internet through the firewall router unless you purchase a
user-limit upgrade.
user-limit upgrade.
Note:
The DHCP Server will not assign an IP address from the dynamic range if the address is
already being used by a computer on your LAN.
Static Entries
The DHCP Server can also assign Static Entries, or static IP addresses, to computers on the LAN.
With a Static Entry, the PC will always receive the same IP address each time it access the DHCP
server. Static IP addresses should be assigned to servers that require permanent IP settings.
With a Static Entry, the PC will always receive the same IP address each time it access the DHCP
server. Static IP addresses should be assigned to servers that require permanent IP settings.
Note:
When assigning a Static Entry, choose an IP address from the firewall router’s LAN subnet
(such as 192.168.0.n), but do not choose an address within the Dynamic Range defined in the
previous section.
previous section.
To assign static IP addresses:
1.
In the Static IP Address box, type the IP address to assign to your computer or server.
2.
In the Ethernet Address box, type the Ethernet (MAC) address of your computer or server.