Netgear FVS338 참조 매뉴얼

Virtual Private Networking

8-1

This chapter describes how to use the virtual private networking (VPN) features of the FVS338 
VPN firewall. VPN tunnels provide secure, encrypted communications between your local 
network and a remote network or computer. 

Tip: When using dual WAN port networks, use the VPN Wizard to configure the basic parameters 
and them edit the VPN and IKE Policy screens for the various VPN scenarios.

 for the procedure on how to select and 

configure the Dynamic DNS service.

This section describes how to configure a VPN connection between a NETGEAR FVX538 VPN 
Firewall and a NETGEAR FVS338 VPN Firewall. 

Using each firewall's VPN Wizard, we will create a set of policies (IKE and VPN) that will allow 
the two firewalls to connect from locations with fixed IP addresses. Either firewall can initiate the 
connection. 

This procedure was developed and tested using:

•

Netgear FVX538 VPN Firewall with version 1.6.11 firmware 

–

WAN1 IP address is 10.1.0.118 

–

LAN IP address subnet is 192.168.1.1 255.255.255.0 

•

Netgear FVS338 VPN Firewall with version 1.6.7 firmware 

–

WAN IP address is 10.1.1.150 

–

LAN IP address subnet is 192.168.2.1 255.255.255.0