Netgear FVS338 참조 매뉴얼
Reference Manual for the ProSafe VPN Firewall 50 FVS338
4-18
Connecting the FVS338 to the Internet
January 2005
6.
Type the entire FQDN name that your dynamic DNS service provider gave you,
such as myName.dyndns.org.
7.
Type the user name for logging into your dynamic DNS account.
8.
Type the password (or key) for your dynamic DNS account.
9.
If your dynamic DNS provider allows the use of wildcards in resolving your URL, you may
select the Use wildcards check box to activate this feature.
select the Use wildcards check box to activate this feature.
For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the same
IP address as yourhost.dyndns.org
IP address as yourhost.dyndns.org
10.
Click Apply to save your configuration.
Configure the WAN Options (If Needed)
Perform the following steps to configure the WAN options:
1.
If you haven’t already, log in to the firewall at its default LAN address of
http://192.168.1.1
with its default user name of
admin
, default password of
password
, or using whatever
password and LAN address you have chosen for the firewall.
2.
From the Main Menu of the browser interface, under WAN Setup, click on Options. You will
get the screen shown in
get the screen shown in
Note:
If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x, the
dynamic DNS service will not work because private addresses will not be routed on the
Internet.
Internet.