Netgear FVS338 참조 매뉴얼

Serial Port Configuration

5-3

You can configure the serial port of the FVS338 to provide an auto-rollover backup connection for 
your broadband service.

Be sure you have prepared the basic requirements listed below, then follow the ‘how to’ procedure.

Auto-Rollover requires these elements:

1.

A broadband connection to the FVS338.

2.

An analog phone line with an active dial-up ISP account

3.

A serial modem properly configured and attached to the DB9 connector on the serial port. 

4.

The Auto-Rollover settings configured and applied to the FVS338. 

Follow the steps below to configure a serial port auto-rollover connection.

1.

Configure a serial port modem according to the instructions above.

2.

From the main menu, click Auto-rollover in the Serial Port section.