Netgear FVS338 참조 매뉴얼
Reference Manual for the ProSafe VPN Firewall 50 FVS338
6-2
LAN Configuration
January 2005
Figure 6-1: LAN IP Setup menu
Configuring LAN TCP/IP Setup Parameters
LAN TCP/IP Setup—The default values are suitable for most users and situations. These are
advanced settings that you may configure if you are a network administrator. RIP is applicable if
your network contains multiple routers.
advanced settings that you may configure if you are a network administrator. RIP is applicable if
your network contains multiple routers.
•
IP Address: Type the IP address of your router (factory default: 192.168.1.1).
Make sure that LAN Port IP address and DMZ port IP address are in different subnets.
Note: Once you have completed the LAN IP setup, all outbound traffic is allowed and all
inbound traffic is discarded. To change these traffic rules, refer to
inbound traffic is discarded. To change these traffic rules, refer to