Netgear FVS338 참조 매뉴얼

6-10

LAN Configuration

4.

Click Apply. 

Note: All incoming traffic to that IP address will be sent to the selected PC. Out-going traffic from 
the selected PC will use the IP address you entered, not the default WAN IP address. No firewall 
protection is available. Use this feature at your own risk.

If you only have one Internet IP address, you cannot use the Multi-DMZ feature. You can only use 
the Default DMZ Server setting (see 

). 

Static Routes provide additional routing information to your firewall. Under normal 
circumstances, the firewall has adequate routing information after it has been configured for 
Internet access, and you do not need to configure additional static routes. You must configure 
static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on 
your network.

From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the 
Static Route menu, shown below.