Netgear FVS338 참조 가이드

6-16

Router and Network Management

If required, you can also enter the address of another NTP server in the Server 2 Name/IP 
Address field. If you select this option and leave either the Server 1 or Server 2 fields 
empty, they will be set to the Default Netgear NTP servers. 

5. Click Apply to save your settings or click Cancel to revert to your previous settings.

You can be alerted to important events such as WAN port rollover, WAN traffic limits reached, and 
login failures and attacks. You can also view status information about the firewall, WAN ports, 
LAN ports, and VPN tunnels.

To monitor traffic limits on each of the WAN ports, select Administration from the main menu 
and Traffic Meter from the submenu. The Broadband Traffic Meter screen will display. (The 
Broadband and Dialup ports are programmed separately.) A WAN port shuts down once its traffic 
limit is reached if the Block all traffic feature is enabled.

The Traffic Meter screen also provides the following information:

•

Internet Traffic Statistics – Displays statistics on Internet Traffic via the WAN port. If you 
have not enabled the Traffic Meter, these statistics are not available.