Netgear FVS338 참조 가이드

Router and Network Management

6-23

You can monitor the status of both of the WAN connections, the Dynamic DNS Server 
connections, and the DHCP Server connections. Select Network Configuration from the main 
menu and WAN Settings from the submenu. The Broadband ISP Settings screen will display. 
Click the Broadband Status link to obtain status on the Broadband port. Select the Dialup ISP 
Settings tab and click the Dialup Status link to obtain status on the Dialup port.

System Name

This is the Account Name that you entered in the Basic Settings page. 

Firmware Version

This is the current software the router is using. This will change if you upgrade your 
router. 

LAN Port

Displays the current settings for MAC address, IP address, DHCP role and IP Subnet 
Mask that you set in the LAN IP Setup page. DHCP can be either Server or None.

Broadband 
Configuration

Indicates whether the WAN Mode is Single or Rollover, and whether the WAN State is 
UP or DOWN. If the WAN State is up, it also displays 
• NAT: Enabled or Disabled. 
• Connection Type: DHCP enabled or disabled.
• Connection State: Connected or Disconnected
• WAN IP Address
• Subnet Mask
• Gateway Address
• Primary and Secondary DNS Server Addresses
• MAC Address.

Dialup Configuration

Displays the same details as for WAN1 Configuration.

Note: The Router Status screen displays current settings and statistics for your router. As 

this information is read-only, any changes must be made on other pages.