Netgear FVS338 부록 매뉴얼
Application Note
Creating a VPN Policy for the FVX538 or FVS338
ProSafe® VPN Firewall with a Remote Endpoint of
0.0.0.0
ProSafe® VPN Firewall with a Remote Endpoint of
0.0.0.0
Summary
This application note describes how to configure a VPN policy to support a remote
gateway IP set to 0.0.0.0.on one WAN interface of a NETGEAR FVX538 or FVS338
ProSafe VPN Firewall. This is an updated version using the version 2.x router firmware.
gateway IP set to 0.0.0.0.on one WAN interface of a NETGEAR FVX538 or FVS338
ProSafe VPN Firewall. This is an updated version using the version 2.x router firmware.
Procedure
This application note describes how to create a VPN Client policy using the VPN Wizard
and then editing that policy to set a remote endpoint of 0.0.0.0. It also describes how to
set the remote endpoint to 0.0.0.0. for VPN policies that were manually created.
and then editing that policy to set a remote endpoint of 0.0.0.0. It also describes how to
set the remote endpoint to 0.0.0.0. for VPN policies that were manually created.
This procedure was tested using the following:
• NETGEAR FVX538 ProSafe VPN Firewall with version V 2.x firmware
o
IP address subnet: 192.168.1.1; 255.255.255.0
Using the VPN Wizard to Create a VPN Policy
VPN menu, select the VPN Wizard submenu.
1. From the
Select the VPN client radio button.
2.
3. Type the connection name and preshared key.
4. Click Apply.