Netgear RT338 참조 가이드
Reference Guide for the Model RT338 ISDN Router
Remote Node Configuration
7-7
Editing PPP Options
To edit PPP options:
1.
Select Yes in the Edit PPP Options field of Submenu 11.1 - Remote Node Profile.
2.
Press [Enter] to display Menu 11.2 - Remote Node PPP Options.
Menu 11.2 - Remote Node PPP Options opens as shown in
.
Figure 7-3.
Menu 11.2 - Remote Node PPP Options
3.
Edit the options described in Table 5-2.
4.
Press [Enter] at the Press ENTER to Confirm... prompt to confirm your selections, and
return to the previous menu.
return to the previous menu.
Press [Esc] at any time to cancel your selections.
5.
Continue to the end of Menu 11.1, and press [Enter] to save the selections you made in
Menu 11.2.
Menu 11.2.
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
BACP= Enable
Multiple Link Options:
BOD Calculation= Transmit or Receive
Base Trans Rate(Kbps)= 64
Max Trans Rate(Kbps)= 64
Target Utility(Kbps)= 32-48
Add Persist(sec)= 5
Subtract Persist(sec)= 5
Press ENTER to Confirm or ESC to Cancel: