Netgear RT338 참조 가이드
Reference Guide for the Model RT338 ISDN Router
Configuring Dial-In Access
8-9
RADIUS Client Configuration
To configure the router’s RADIUS client:
1.
From the Manager Interface Main Menu, open Menu 23 - System Security.
2.
Type 2 and press [Enter] to open Menu 23.2 - System Security - External Server as
shown in
shown in
Figure 8-4.
Menu 23.2 - System Security - External Server
3.
Determine which port is used by your server software and set the Port # field in
Menu 23.2.
Menu 23.2.
The RADIUS authentication port was originally 1645 but was changed to 1812 in later
implementations.
implementations.
You must reboot your router after changing the RADIUS port number.
4.
.
Menu 23.2 - System Security - External Server
Authentication Server:
Active= No
Type: RADIUS
Server Address= ?
Port #= 1645
Key= ?
Press ENTER to Confirm or ESC to Cancel: