Netgear RT338 참조 가이드
Reference Guide for the Model RT338 ISDN Router
Configuring Filters
9-11
Implementing the Filter
Now you can proceed to define a call filter to block the three NetBIOS service ports.
To define a call filter:
1.
, and choose a name and filter set.
Figure 9-5.
Menu 21 - Filter Set Configuration
2.
Next, define the filter rules.
You want your filter to ignore (drop) UDP and TCP packets originating from ports 137, 138,
and 139. Because each protocol/port combination must be specified as a separate rule, there
are six rules. Each filter set contains six rules, so you fill one entire set. Begin with rule 1, as
illustrated in
and 139. Because each protocol/port combination must be specified as a separate rule, there
are six rules. Each filter set contains six rules, so you fill one entire set. Begin with rule 1, as
illustrated in
.
Menu 21 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 netbios 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 1
Edit Comments= netbios
Press ENTER to Confirm or ESC to Cancel: