Netgear RT338 참조 가이드

Initial Router Configuration

4-3

After you have found and selected a router using FirstGear, choose either the Setup Wizard or the 
Advanced Setup option:

•

Choose the Setup Wizard option to configure basic Internet access applications in which your 
network only dials out to an ISP. The Setup Wizard interface consists of a wizard that leads 
you through various menus and asks for basic information.

•

Choose the Advanced Setup option to customize more advanced aspects of the configuration 
and to save configuration files to your PC. Using the Advanced Setup menus, you can 
configure your router for dialing to multiple remote locations. For more complex applications 
than this, NETGEAR recommends that you use the internal Manager interface.

Refer to 

” for instructions on configuring 

the router with FirstGear.

Before starting FirstGear, verify that the router is properly connected to your Ethernet network and 
that the router has had power turned on for at least one minute. 

To start the FirstGear Setup Wizard:

•

From the Windows Taskbar, click Start and choose Programs > FirstGear for RT338 > Setup 
Wizard

To start FirstGear Advanced Setup:

•

From the Windows Taskbar, click Start and choose Programs > FirstGear for RT338 > 
Advanced Setup

When you start FirstGear, it searches the attached LAN for the Model RT338 router. If FirstGear 
does not find a Model RT338 router, it displays an alert box.