Netgear DG834PN 참조 가이드

TM

Protecting Your Network

4-11

— Single address — enter the required address in the Start field. 

•

WAN Users

 

These settings determine which packets are covered by the rule, based on their destination 
WAN IP address. Select the desired option: 

— Any — all IP addresses are covered by this rule. 

— Address range —if this option is selected, you must enter the Start and Finish fields. 

— Single address — enter the required address in the Start field. 

•

Log

 

You can select whether the traffic will be logged. The choices are:

— Never — no log entries will be made for this service.

— Always — any traffic for this service type will be logged.

— Match — traffic of this type that matches the parameters and action will be logged.

— Not match — traffic of this type that does not match the parameters and action will be 

logged.

As you define new rules, they are added to the tables in the Rules menu, as shown in 

:

For any traffic attempting to pass through the firewall, the packet information is subjected to the 
rules in the order shown in the Rules Table, beginning at the top and proceeding to the default rules 
at the bottom. In some cases, the order of precedence of two or more rules may be important in 
determining the disposition of a packet. The Move button allows you to relocate a defined rule to a 
new position in the table.