Netgear DG834PN 참조 가이드

Troubleshooting

7-1

This chapter gives information about troubleshooting your DG834PN 108 Mbps RangeMax

TM

 

ADSL Modem Wireless Router. After each problem description, instructions are provided to help 
you diagnose and solve the problem. For the common problems listed, go to the section indicated.

•

Is the router on?

•

Have I connected the router correctly?

.

•

I can’t access the router’s configuration with my browser.

•

I’ve configured the router but I can’t access the Internet.

Go to 

“Troubleshooting the ISP Connection” on page 7-4

.

•

I can’t remember the router’s configuration password.

•

I want to clear the configuration and start over again.

.

After you turn on power to the router, the following sequence of events should occur:

1. When power is first applied, verify that the Power LED is on (see 

 for an illustration and explanation of the LEDs).

2. Verify that the Test LED lights within a few seconds, indicating that the self-test procedure is 

running.

3. After approximately 10 seconds, verify that:

a. The Test LED is not lit.

b. The LAN port LEDs are lit for any local ports that are connected.

The WAN port LED is lit.