Netgear DGN2200M 사용자 설명서

Cannot Log In to the Wireless-N Modem Router

If you are unable to log in to the wireless modem router from a computer on your local 
network, check the following:

If you are using an Ethernet-connected computer, check the Ethernet connection 

between the computer and the router as described in the previous section.

Make sure that your computer’s IP address is on the same subnet as the router. If you are 

using the recommended addressing scheme, your computer’s address should be in the 
range of 192.168.0.2 to 192.168.0.254. 

If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and 

MacOS will generate and assign an IP address if the computer cannot reach a DHCP 
server. These autogenerated addresses are in the range of 169.254.x.x. If your IP 
address is in this range, check the connection from the computer to the router, and reboot 
your computer.

If your router’s IP address was changed and you do not know the current IP address, 

clear the router’s configuration to factory defaults. This sets the router’s IP address to 
192.168.0.1. This procedure is explained in 

108.

Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using 

Internet Explorer, click Refresh to be sure that the Java applet is loaded.

Try quitting the browser and launching it again.

Make sure you are using the correct login information. The factory default login name is 

admin, and the password is password. Make sure that Caps Lock is off when you enter 
this information.

If the router does not save changes you have made while logged in, check the following:

When entering configuration settings, be sure to click the Apply button before moving to 

another screen or tab, or your changes are lost. 

Click the Refresh or Reload button in the web browser. The changes might have 

occurred, but the web browser might be caching the old configuration.

The LAN Ports LEDs are off.

If the LAN Ports LEDs do not light when the Ethernet connection is made, 
check the following:

• Make sure that the Ethernet cable connections are secure at the wireless 

modem router and computer.

• Make sure that power is turned on to the connected modem or computer.

WiFi LED is off.

If the WiFi LED does not come on, verify that the Enable Wireless Router 
Radio check box is selected on the Wireless Settings screen. See 

34.