Netgear DGND3700 사용자 가이드
NETGEAR VPN Configuration
167
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Verify that the firmware is up to date, and make sure you have all the addresses and
parameters to be set on both sides. Assure that there are no firewall restrictions
parameters to be set on both sides. Assure that there are no firewall restrictions
Table 27. Configuration summary (telecommuter example)
VPN Consortium Scenario
Scenario 1
Type of VPN:
PC/client-to-gateway, with client behind NAT router
Security scheme:
IKE with pre-shared secret/key (not certificate based)
IP addressing:
Gateway
Fully qualified domain name (FQDN)
Client
Dynamic
.
Gateway A
(main office)
Gateway B
LAN IP
192.168.0.1
192.168.0.1/24
FQDN
ntgr.dyndns.org
“from_GW_A”
WAN IP
Internet
WAN IP
0.0.0.0
“toGW_A”
IP: 192.168.2.3
(regional office)
Client PC
(running NETGEAR
ProSafe VPN client)
ProSafe VPN client)
Figure 64. Telecommuter example
Set Up Client-to-Gateway VPN (Telecommuter Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN client and a
network gateway involves two steps, described in the following sections:
network gateway involves two steps, described in the following sections:
•
•
configuring the NETGEAR ProSafe VPN client endpoint.