Netgear WGT634U 참조 매뉴얼

Troubleshooting

9-5

OR

Configure your router to spoof your computer’s MAC address. This can be done in the Basic 
Settings menu. Refer to 

.

If your router can obtain an IP address, but your computer is unable to load any Web pages from 
the Internet:

•

Your computer may not recognize any DNS server addresses. 

A DNS server is a host on the Internet that translates Internet names (such as www addresses) 
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS 
servers for your use. If you entered a DNS address during the router’s configuration, reboot 
your computer and verify the DNS address as described in 

. Alternatively, you may configure your computer manually with DNS addresses, as 

explained in your operating system documentation.

•

Your computer may not have the router configured as its TCP/IP gateway.

If your computer obtains its information from the router by DHCP, reboot the computer and 
verify the gateway address as described in 

Most TCP/IP terminal devices and routers contain a ping utility that sends an echo request packet 
to the designated device. The device then responds with an echo reply. Troubleshooting a TCP/IP 
network is made very easy by using the ping utility on your computer.

You can ping the router from your PC to verify that the LAN path to your router is set up correctly.

To ping the router from a PC running Windows 95 or later:

1.

From the Windows toolbar, click the Start button and select Run.

2.

In the field provided, type Ping followed by the IP address of the router, as in this example:

3.

Click on OK.

You should see a message like this one: