Netgear WGT634U 참조 매뉴얼
Reference Manual for the 108 Mbps Wireless Media Router WGT634U
Maintenance
7-9
April 2004, 202-10018-02
Backing Up and Restoring the Configuration
The Backup and Restore options in the Settings Backup menu allow you to save and retrieve a file
containing your router’s configuration settings.
containing your router’s configuration settings.
To save your settings, select the Backup tab. Click the Backup button. Your browser will extract
the configuration file from the router and will prompt you for a location on your PC to store the
file. You can give the file a meaningful name at this time, such as pacbell.cfg.
the configuration file from the router and will prompt you for a location on your PC to store the
file. You can give the file a meaningful name at this time, such as pacbell.cfg.
To restore your settings from a saved configuration file, enter the full path to the file on your PC or
click the Browse button to browse to the file. When you have located it, click the Restore button to
send the file to the router.
click the Browse button to browse to the file. When you have located it, click the Restore button to
send the file to the router.
Note:
When restoring software to the WGT634U Wireless Media Router, it is important not to
interrupt the Web browser by closing the window, clicking a link, or loading a new page. If the
browser is interrupted, it may corrupt the software. When the restore is complete, your router will
automatically restart. The restore process typically takes about one minute.
browser is interrupted, it may corrupt the software. When the restore is complete, your router will
automatically restart. The restore process typically takes about one minute.
Erasing the Configuration
It is sometimes desirable to restore the router to the factory default settings. This can be done by
using the Erase function, which will restore all factory settings. After an erase, the router's
password will be password, the LAN IP address will be 192.168.1.1, and the router's DHCP client
will be enabled.
using the Erase function, which will restore all factory settings. After an erase, the router's
password will be password, the LAN IP address will be 192.168.1.1, and the router's DHCP client
will be enabled.
To erase the configuration, click the Erase button.
To restore the factory default configuration settings without knowing the login password or IP
address, you must use the Reset button on the rear panel of the router. See
address, you must use the Reset button on the rear panel of the router. See
Changing the Administrator Password
The default password for the router’s Web Configuration Manager is password. NETGEAR
recommends that you change this password to a more secure password.
recommends that you change this password to a more secure password.